| 大直径高强度镀锌钢丝拉拔 |
| |
| 引用本文： | 秦卢峰,康公. 大直径高强度镀锌钢丝拉拔[J]. 金属制品, 2006, 32(2): 20-21 |
| |
| 作者姓名： | 秦卢峰 康公 |
| |
| 作者单位： | 河北巨力集团有限公司,保定,072550;河北巨力集团有限公司,保定,072550 |
| |
| 摘 要： | 分析大直径高强度镀锌钢丝拉拔困难的主要原因在于锌-铁合金层较厚、钢丝中碳含量和锰含量较高。通过采用小压缩率多道次拉拔工艺,减少锌-铁合金的厚度,积极采用人工时效工艺等解决了拉拔困难的问题。
|
| 关 键 词： | 镀锌钢丝 拉拔 锌-铁合金 |
| 收稿时间： | 2005-09-20 |
| 修稿时间： | 2005-09-20 |
Drawing of High Strength Thick Galvanized Steel Wire |
| |
| Qin Lufeng,Kang Gong. Drawing of High Strength Thick Galvanized Steel Wire[J]. Steel Wire Products, 2006, 32(2): 20-21 |
| |
| Authors: | Qin Lufeng Kang Gong |
| |
| Affiliation: | Hebei Juli Group Co. , Ltd. Baoding 072550 |
| |
| Abstract: | It is indicated by analysis that the main causes of difficulty of drawing high strength thick galvanized steel wire are thicker Zn-Fe alloy coat and higher carbon and manganese contents. The drawing difficulty is settled by adopting small draught and multi-pass drawing process, reducing the thickness of Zn-Fe alloy and using artificial aging process actively. |
| |
| Keywords: | galvanized steel wire drawing Zn-Fe alloy |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
