|
|||||
|
|
| 纳米TiN-Al_2O_3基复相陶瓷的电学及力学性能 | |
| 引用本文： | 杨治华,贾德昌,褚雷阳,段小明,罗芳,周玉,张培峰.纳米TiN-Al_2O_3基复相陶瓷的电学及力学性能[J].硅酸盐学报,2010(8). |
| 作者姓名： | 杨治华 贾德昌 褚雷阳 段小明 罗芳 周玉 张培峰 |
| 作者单位： | 1. 哈尔滨工业大学材料科学与工程学院,特种陶瓷研究所; 2. 中国人民解放军第二炮兵驻哈尔滨地区军事代表室; 3. 哈尔滨工业大学材料科学与工程学院,特种陶瓷研究所;哈尔滨工业大学材料科学与工程学院，金属精密热加工国防科技重点实验室，哈尔滨150001) |
| 摘 要： | 以纳米Al2O3和TiN为原料,以SiO2为助烧剂,热压烧结后获得TiN-Al2O3复相陶瓷。TiN-Al2O3复相陶瓷具有较优异的力学性能:三点弯曲强度最高达到565.8MPa,断裂韧性在4～6MPa·m1/2之间。复相陶瓷中立方TiN均匀地分布在Al2O3基体中,TiN颗粒主要分布在Al2O3晶界处。当TiN颗粒的体积含量为5%时,TiN-Al2O3复相陶瓷的电阻率在1012～104Ω·cm范围内,其加载电压可达0.75kV/mm。 |
| 关 键 词： | 导电陶瓷 氧化铝-氮化钛复合陶瓷 导电性能 力学性能 |
ELECTRICAL AND MECHANICAL PROPERTIES OF NANO-SIZED TiN-Al2O3 CERAMICS |
|
| YANG Zhihua,JIA Dechang,CHU Leiyang,DUAN Xiaoming,LUO Fang,ZHOU Yu,ZHANG Peifeng.ELECTRICAL AND MECHANICAL PROPERTIES OF NANO-SIZED TiN-Al2O3 CERAMICS[J].Journal of The Chinese Ceramic Society,2010(8). | |
| Authors: | YANG Zhihua JIA Dechang CHU Leiyang DUAN Xiaoming LUO Fang ZHOU Yu ZHANG Peifeng |
| Abstract: | Nano TiN-Al2O3 composite ceramics were prepared by hot-pressing using nano Al2O3 and TiN as raw materials and SiO2 as sintering additive. The flexural strength of the as-prepared ceramics is up to 565.8 MPa and the fracture toughness is between 4 and 6 MPa·m1/2. The cubic TiN grains are homogenously distributed in Al2O3 matrix in the composite ceramics. Most of TiN particles lay in the grain boundaries of Al2O3. When the volume fraction of TiN was 5%,the electrical resistivity of TiN-Al2O3 composite ceramics is between 1012 to 104 Ω·cm. The highest on-load voltage of the ceramics could reach 0.75 kV/mm. |
| Keywords: | conductive ceramics alumina-titanium nitride composite ceramics electrical properties mechanical properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |