Mechanical properties of short fiber reinforced thermoplastic composites —I. Elastic properties and predictions

Twin roll-mill and compression molding machines were used to process the unidirectional ply of short fiber reinforced thermoplastics (FRTP). FRTP laminates were prepared by compression molding of angle plies with the desired stacking sequences.The fiber length and orientation distributions in FRTP took place after processing. Therefore, a statistical distribution function such as WeiBull distribution function was applied to represent the existing fiber length distribution. The orientation distribution in FRTP was characterized by a single parameter exponential function. Elastic moduli of the unidirectional ply were predicted by the Halpin-Tsai equation where the fiber length distribution was introduced to the estimation. The overall elastic moduli of laminates were estimated based on the simulated laminate-plate method. A comparison of measured elastic moduli with theoretical predicted results from unidirectional ply and laminate was discussed in this study.