Pellets Prepared with Mechanically Activated Iron Ore

This work analyses pellets prepared with iron ore that has been mechanically activated by high energy ball milling. Pellet feed iron ore was submitted to high‐energy ball milling for 60 minutes, and the resulting material was analysed through measurements of particle size and specific surface area, as well as X‐ray diffraction. Pellets were prepared from this material. The pellets were heated at temperatures ranging from 1000 to 1250°C in a muffle furnace, and submitted to the maximum temperature during 10‐12 minutes. The samples were then tested regarding crushing strength, densification and porosity, and were examined in a scanning electronic microscope. The results were compared to those obtained with similar samples made from non‐milled pellet feed. It has been shown that through high‐energy ball milling of iron ore it is possible to achieve pellets presenting high densification and compressive strength at firing temperatures lower than the usual ones.