A new fast‐response buck converter using accelerated pulse‐width‐modulation techniques

A new fast‐response buck converter using accelerated pulse‐width‐modulation techniques is proposed in this article. The benefits of the accelerated pulse‐width‐modulation technique is fast‐transient response, simple‐compensation design, and no requirement for slope compensation; furthermore, some power management problems are minimized, such as EMI (Electro Magnetic Interference), size, design complexity, and cost. The traditional voltage‐mode speed is slower with the transient response, so an accelerated pulse‐width‐modulation technique is used to solve the problem of slowed transient response in this article. The proposed buck converter has excellent conversion efficiency with a wide load conditions. The proposed buck converter has been fabricated with TSMC 0.35 µm CMOS 2P4M processes, and the total chip area is 1.32 × 1.22 mm². Maximum output current is 300 mA when the output voltage equals 1.8 V. When the supply voltage is 3.6 V, the output voltage can be 1–2.6 V. Maximum transient response is less than 5 µs. The simulation and experimental results are presented in this article. Copyright © 2011 John Wiley & Sons, Ltd.