| 滚切剪剪切机构优化设计系统的构建 |
| |
| 引用本文： | 杨刚俊,余隋怀,张恒昌,陈国定. 滚切剪剪切机构优化设计系统的构建[J]. 机械设计, 2009, 26(3) |
| |
| 作者姓名： | 杨刚俊 余隋怀 张恒昌 陈国定 |
| |
| 作者单位： | 西北工业大学机电学院,陕西,西安,710072;太原科技大学工业设计研究所,山西,太原,030024;西北工业大学机电学院,陕西,西安,710072;太原科技大学工业设计研究所,山西,太原,030024 |
| |
| 摘 要： | 构建了集成剪切机构优化设计与设计验证于一体的滚切剪剪切机构优化设计系统.探讨了剪切力公式选取的合理性,并分析了滚切初期阶段剪切力峰值的产生原因与克服技术,在此基础上将二者融合到设计模块中,提高了优化设计的科学性.并对该软件系统进行了可行性验证,结果表明了该软件系统的有效性.
|
| 关 键 词： | 滚切剪 剪切机构 优化设计 剪切力峰值 |
Construction on the optimization designing system of shearing mechanism of rolling shear |
| |
| YANG Gang-jun,YU Sui-huai,ZHANG Heng-chang,CHEN Guo-ding. Construction on the optimization designing system of shearing mechanism of rolling shear[J]. Journal of Machine Design, 2009, 26(3) |
| |
| Authors: | YANG Gang-jun YU Sui-huai ZHANG Heng-chang CHEN Guo-ding |
| |
| Affiliation: | 1.School of Mechatronics Engineering;Northwest Polytechnic University;xi'an 710072;China;2.Research Institute of Industrial Design Taiyuan University of Science and Technology;Taiyuan 030024;China |
| |
| Abstract: | The optimization designing system of shearing mechanism of rolling shear that integrated the optimization design of shearing mechanism with the verification of design into an organic whole has been constructed.The rationality on the selection of shearing force formulae was discussed,and the cause of production and the overcoming technology on the peak value of shearing force in the initial stage of roll cutting were analyzed.Hereon this base,let the two be syncretized into the design module,thus enhanced th... |
| |
| Keywords: | rolling shear shearing mechanism optimization design peak value of shearing force |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
