Passivity behavior of melt-spun Mg–Y Alloys

Several Mg–Y binary ribbons with Y content up to 17.9 at.% were fabricated by melt-spinning. X-ray diffraction (XRD) revealed that the phase structure changes with increasing Y content from extended solid solution to partially amorphous, and then fully intermetallic Mg₂₄Y₅. Anodic potentiodynamic polarization performed in 0.01 M NaCl electrolyte (pH=12) revealed improved anodic passivity behavior compared to pure Mg for all the Mg–Y alloys. X-ray photoelectron spectroscopy (XPS) revealed that the improved passivity of Mg–Y was more related to the elemental oxidation state rather than the concentration of the surface components. To study the effect of Cl^? ion on the passivity behavior, anodic potentiodynamic and potentiostatic polarization were performed on Mg–17.9 at.% Y in alkaline (pH=12) NaCl electrolytes containing Cl^? ion in the concentration range from 0.00 to 0.50 M. The passive films formed in 0.01 M NaCl electrolyte were similar to the native film, which were composed of MgO and Y₂O₃. No CO₃^2? and Cl^? ions were incorporated into the passive film. The passivity was significantly degraded in the electrolytes containing higher Cl^? concentration (0.1 and 0.5 M). Detailed XPS revealed that the surface films under these conditions were composed of much hydrated species Mg(OH)₂ and YOOH and/or Y(OH)₃ and CO₃^2? was incorporated into the surface film. The incorporation of Y₂O₃ in the passive film was given as the reason for the enhanced passivity properties of Mg–Y ribbons. The mechanism of Cl^? and CO₃^2? ions to the degradation of the passivity was discussed.