|
|||||
|
|
| Influence of prior austenite grain size on the critical strain for completion of DEFT through hot compression test | |
| 引用本文： | Jing Tian Wangyue Yang Zuqing Sun Jianping He. Influence of prior austenite grain size on the critical strain for completion of DEFT through hot compression test[J]. 北京科技大学学报(英文版), 2006, 13(2): 135-138. DOI: 10.1016/S1005-8850(06)60030-3 |
| 作者姓名： | Jing Tian Wangyue Yang Zuqing Sun Jianping He |
| 作者单位： | [1]Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China [2]Radioactivity School, Taishan Medical University, Tai＇an 271016, China [3]State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China |
| 基金项目： | This work was financially supported by the National Science and Technology Ministry to the research project ＇Advanced industrialization technique of manufacture for carbon steel of 500 MPa grade＇ （No,2001AA332020）. |
| 摘 要： | A low carbon steel was used to determine the critical strain εc for completion of deformation enhanced ferrite transformation （DEFT） through a series of hot compression tests. In addition, the influence of prior austenite grain size （PAGS） on the critical strain was systematically investigated. Experimental results showed that the critical strain is affected by PAGS. When γ→α transformation completes, the smaller the PAGS is, the smaller the critical strain is. The ferrite grains obtained through DEFT can be refined to about 3 μm when the DEFT is completed. |
| 关 键 词： | 热压 低碳钢 铁素体转变 临界应变 奥氏体 晶粒结构 |
| 收稿时间： | 2005-03-22 |
Influence of prior austenite grain size on the critical strain for completion of DEFT through hot compression test |
|
| Jing Tian,Wangyue Yang,Zuqing Sun,Jianping He. Influence of prior austenite grain size on the critical strain for completion of DEFT through hot compression test[J]. Journal of University of Science and Technology Beijing, 2006, 13(2): 135-138. DOI: 10.1016/S1005-8850(06)60030-3 | |
| Authors: | Jing Tian Wangyue Yang Zuqing Sun Jianping He |
| Affiliation: | 1. Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Radioactivity School, Taishan Medical University, Tai'an 271016, China 2. Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China 3. State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China |
| Abstract: | A low carbon steel was used to determine the critical strain εc for completion of deformation enhanced ferrite transformation (DEFT) through a series of hot compression tests.In addition, the influence of prior austenite grain size (PAGS) on the critical strain was systematically investigated.Experimental results showed that the critical strain is affected by PAGS.When γ→α transformation completes, the smaller the PAGS is, the smaller the critical strain is.The ferrite grains obtained through DEFT can be refined to about 3 μm when the DEFT is completed. |
| Keywords: | low carbon steel hot compression deformation enhanced ferrite transformation critical strain prior austenite grain size |
| 本文献已被 CNKI 维普 万方数据 ScienceDirect 等数据库收录！ | |