| 铁基块体非晶合金的摩擦磨损性能 |
| |
| 引用本文： | 王莉,晁月盛. 铁基块体非晶合金的摩擦磨损性能[J]. 功能材料, 2011, 42(1): 77-79 |
| |
| 作者姓名： | 王莉 晁月盛 |
| |
| 作者单位： | 东北大学理学院;辽宁石油化工大学理学院; |
| |
| 基金项目： | 国家自然科学基金资助项目(50771025) |
| |
| 摘 要： | 采用电弧熔炼、铜模吸铸法制备直径为5mm的Fe基块体非晶合金棒,利用销-盘式摩擦磨损试验机进行干摩擦磨损实验,利用扫描电子显微镜观察摩擦磨损形貌,研究了铁基块体非晶合金的摩擦磨损行为,并与GCr15轴承钢进行了对比.结果表明,铁基非晶合金具有较好的耐磨性能,30N载荷作用下,随着摩擦磨损行程的延长,铁基非晶合金体现了不...
|
| 关 键 词： | 铁基非晶合金 摩擦 磨损 |
Friction and wear characteristics of Fe-based bulk metallic glasses |
| |
| WANG Li,CHAO Yue-sheng. Friction and wear characteristics of Fe-based bulk metallic glasses[J]. Journal of Functional Materials, 2011, 42(1): 77-79 |
| |
| Authors: | WANG Li CHAO Yue-sheng |
| |
| Affiliation: | WANG Li1,2,CHAO Yue-sheng1 (1.College of Sciences,Northeastern University,Shenyang 110004,China,2.School of Sciences,Liaoning Shihua University,Fushun 113001,China) |
| |
| Abstract: | The amorphous alloy rods with a diameter of 5mm of Fe41Co7Cr15Mo14C15B6Y2 were prepared by copper mold with sucking casting method.The characteristics of dry wear behavior for Fe-based bulk metallic glasses and GCr15 steel were investigated using pin-tray equipment at the ambient temperature in this paper.Worn surface morphologies of the samples were observed on a scanning electron microscope.Friction and wear characteristics of the Fe-based bulk metallic were studied and compared with GCr15 steel.Result in... |
| |
| Keywords: | Fe-based amorphous alloy friction wear |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
