| 丙烯酸酯压敏胶的研究进展 |
| |
| 引用本文： | 杨玉琴,李亚宁. 丙烯酸酯压敏胶的研究进展[J]. 信息记录材料, 2011, 12(2): 39-44 |
| |
| 作者姓名： | 杨玉琴 李亚宁 |
| |
| 作者单位： | 1. 中国乐凯胶片集团公司研究院,保定,071054
2. 乐凯胶片股份有限公司研发部,保定,071054 |
| |
| 摘 要： | 本文综述了近年来各种丙烯酸酯压敏胶的研究进展,包括乳液型、溶剂型、热熔型、辐射固化型、阻燃型压敏胶等。其中,重点介绍了乳液型丙烯酸酯类压敏胶的研究进展。通过加入增粘树脂、有机硅单体、反应性乳化剂或采用核壳聚合的方式提高其粘结强度,可以改善该类压敏胶的耐水性差、耐高温性差及涂布干燥等缺点,从而使该类压敏胶的用途更加广泛。最后,文章对于丙烯酸酯压敏胶今后的研发方向进行了预测。
|
| 关 键 词： | 丙烯酸酯 压敏胶 乳液型 溶剂型 热熔型 辐射固化型 |
The Development of Acrylate Pressure-Sensitive Adhesive |
| |
| YANG Yu-qin,LI Ya-ning. The Development of Acrylate Pressure-Sensitive Adhesive[J]. Information Recording Materials, 2011, 12(2): 39-44 |
| |
| Authors: | YANG Yu-qin LI Ya-ning |
| |
| Affiliation: | YANG Yu-qin1,LI Ya-ning2 (1.China Lucky Film Group Corp.,Baoding 071054,China,2.Lucky Film Co.,Ltd.,China) |
| |
| Abstract: | The development of all kinds of acrylate pressure-sensitive adhesives(PSAs) in recent years were summarized.Among these,there were emulsion-based,solvent-based,hot-melt,UV/EB curing,flame-resistant type of acrylate PSA,and so on.Especially,the development of emulsion-based acrylate PSA was introduced.And by adding tackifying resin,organic silicon monomer,reactive emulsifier or using the way of core/shell polymerization,its adhensive intensity can be increased,its disadvantages of bad water-resistant、heat-resistant and dry daub can be improved,thus this type of PSA will be used more widely.Finally,the prospect of acrylate PSA was predicted. |
| |
| Keywords: | acrylate pressure-sensitive adhesive(PSA) emulsion-based solvent-based hot-melt UV/EB curing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
