EBSD analysis of a Ti-IF steel subjected to hot torsion in the ferritic region |
| |
Authors: | A Oudin PD Hodgson MR Barnett |
| |
Affiliation: | aSchool of Engineering and Technology, Deakin University, Geelong, VIC 3217, Australia |
| |
Abstract: | The effect of grain size on the warm deformation behaviour of a titanium stabilized interstitial free steel was investigated using hot torsion. Tests were performed at temperatures between 765 °C and 850 °C at strain rates between 0.003 s?1 and 1 s?1 for samples with grain sizes of 25 μm, 75 μm and 150 μm. The structures were observed using EBSD analysis and are consistent with those expected for materials dominated by dynamic recovery. Some evidence was found for small amounts of thermally induced migration of pre-existing boundary (bulging) and for the generation of new segments of high angle boundaries by continuous dynamic recrystallization. The early onset of a steady-state flow stress in the finer grained samples is attributed to one or a combination of thermally induced boundary migration and enhanced rates of recovery near subgrain (and grain) boundaries. |
| |
Keywords: | IF steel Ferrite deformation Warm deformation Flow curve Torsion test |
本文献已被 ScienceDirect 等数据库收录! |