Phase separated thermotropic layers based on UV cured acrylate resins - Effect of material formulation on overheating protection properties and application in a solar collector |
| |
Authors: | Katharina Resch Gernot M. Wallner |
| |
Affiliation: | a Polymer Competence Center Leoben GmbH, Roseggerstrasse 12, 8700 Leoben, Austria b Institute of Materials Science and Testing of Plastics, University of Leoben, Franz-Josef Strasse 18, 8700 Leoben, Austria c AEE - Institut für Nachhaltige Technologien (AEE-INTEC), Feldgasse 19, 8200 Gleisdorf, Austria |
| |
Abstract: | This paper focuses on the effect of material composition on the overheating protection properties of thermotropic systems with fixed domains for solar thermal collectors. Numerous functional layers were prepared by a variation of base resin (polyester-, epoxy- or urethane-acrylate) and of thermotropic additives (non-polar and polar waxes) as well as by additive concentration (5 and 7 wt%). A detailed investigation of optical properties, switching temperature and switching process was performed applying UV/Vis/NIR spectroscopy. Thermal transitions of both the thermotropic layers and the additives used were determined by Differential Scanning Calorimetry (DSC). The capability of the produced thermotropic layers to reduce stagnation temperatures in an all-polymeric flat plate collector was evaluated by theoretical modeling. The thermotropic layers showed a hemispheric solar transmittance between 76% and 87% in clear state. Above the switching threshold this transmittance changed by 1-16% to values between 62% and 85%. The layers exhibited switching temperatures between 33 and 80 °C. The transition is fully completed within a temperature frame of 10-25 °C. Resin types with higher glass transition temperatures were detected to benefit the reduction of the hemispheric solar transmittance above the switching threshold. This reduction was also found to increase with increasing molecular weight of the non-polar additive types. The comparison of the switching performance with the thermal transitions of the additives revealed a good correlation. Theoretical modeling showed that by the use of selected thermotropic layers in the glazing the maximum absorber temperatures can be limited to temperatures below 130 °C. |
| |
Keywords: | All-polymeric solar collector Overheating protection Thermotropic resin UV/Vis/NIR spectroscopy Switching performance Modeling |
本文献已被 ScienceDirect 等数据库收录! |
|