首页 | 本学科首页   官方微博 | 高级检索  
     

基于控制流分析的隐藏代码动态捕获方法
引用本文:刘建林,王震宇,蒋烈辉,谢耀滨,刘絮颖. 基于控制流分析的隐藏代码动态捕获方法[J]. 计算机工程, 2011, 37(21): 23-25. DOI: 10.3969/j.issn.1000-3428.2011.21.008
作者姓名:刘建林  王震宇  蒋烈辉  谢耀滨  刘絮颖
作者单位:解放军信息工程大学信息工程学院,郑州,450002
基金项目:国家"863"计划基金资助项目,河南省高新领域重点攻关计划基金资助项目
摘    要:为获取并分析采用加壳、控制流混淆技术所产生的隐藏代码,提出一种新的隐藏代码动态捕获方法。利用静态控制流分析算法提取动态捕获点,采用动态二进制插桩技术插入监控代码,在程序的执行过程中实现隐藏代码的执行前分析。实验结果证明,该方法能够减少程序插桩点,有效获取并分析可执行程序中的隐藏代码。

关 键 词:隐藏代码  动态捕获  控制流分析  动态二进制插桩  执行前分析
收稿时间:2011-04-19

Dynamic Capture Method for Hidden Code Based on Control Flow Analysis
LIU Jian-lin,WANG Zhen-yu,JIANG Lie-hui,XIE Yao-bin,LIU Xu-ying. Dynamic Capture Method for Hidden Code Based on Control Flow Analysis[J]. Computer Engineering, 2011, 37(21): 23-25. DOI: 10.3969/j.issn.1000-3428.2011.21.008
Authors:LIU Jian-lin  WANG Zhen-yu  JIANG Lie-hui  XIE Yao-bin  LIU Xu-ying
Affiliation:(Institute of Information Engineering,PLA Information Engineering University,Zhengzhou 450002,China)
Abstract:In order to capture and analyze the hidden code produced by shell and control flow obfuscation techniques,this paper proposes a dynamic capture method based on control flow analysis to analyze hidden code.By extracting dynamic capture points with control flow analysis,and inserting monitoring code with dynamic binary instrumentation,it can implement the pre-execution analysis for hidden code.Experimental results show that the method can reduce the number of instrumented program locations,and capture the hidden code for analyzing effectively.
Keywords:hidden code  dynamic capture  control flow analysis  dynamic binary instrumentation  pre-execution analysis
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《计算机工程》浏览原始摘要信息
点击此处可从《计算机工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号