| 铝合金轮毂连接盘挤压铸造数值模拟 |
| |
| 引用本文： | 王伟,崔晓明,石博,白朴存.铝合金轮毂连接盘挤压铸造数值模拟[J].铸造,2021(3):306-310. |
| |
| 作者姓名： | 王伟 崔晓明 石博 白朴存 |
| |
| 作者单位： | 内蒙古工业大学材料科学与工程学院 |
| |
| 基金项目： | 内蒙古科技计划项目(201802029);内蒙古自治区科技重大专项(zdzx2018031)。 |
| |
| 摘 要： | 采用ProCAST软件对6061铝合金轮毂连接盘挤压铸造过程进行模拟。研究了浇注温度、模具预热温度、比压对铸件缩孔缩松的影响。结果表明,浇注温度700℃、模具预热温度300℃、比压50 MPa为最佳铸造方案。
|
| 关 键 词： | 铝合金 轮毂连接盘 挤压铸造 数值模拟 |
Numerical Simulation of Squeeze Casting of Aluminum Alloy Wheel Hub Connecting Plate |
| |
| WANG Wei,CUI Xiao-ming,SHI Bo,BAI Pu-cun.Numerical Simulation of Squeeze Casting of Aluminum Alloy Wheel Hub Connecting Plate[J].Foundry,2021(3):306-310. |
| |
| Authors: | WANG Wei CUI Xiao-ming SHI Bo BAI Pu-cun |
| |
| Affiliation: | (Inner Mongolia University of Technology,Materials Science and Engineering College,Hohhot 010321,Inner Mongolia,China) |
| |
| Abstract: | ProCAST software was used to simulate the squeeze casting process of 6061 aluminum alloy wheel hub.The effects of pouring temperature,mold preheating temperature and specific pressure on the shrinkage defects of castings were studied.It is concluded that the optimal casting process is the pouring temperature of 700℃,the mold preheating temperature of 300℃,and the specific pressure of 50 MPa. |
| |
| Keywords: | aluminum alloy wheel hub connecting plate squeeze casting numerical simulation |
| 本文献已被 维普 等数据库收录！ |
