| 燃油凸轮实测升程分析及其运动规律的计算 |
| |
| 引用本文： | 唐后启,贾锡印,徐漫平.燃油凸轮实测升程分析及其运动规律的计算[J].哈尔滨工程大学学报,1989(4). |
| |
| 作者姓名： | 唐后启 贾锡印 徐漫平 |
| |
| 作者单位： | 哈尔滨船舶工程学院船舶动力工程系
(唐后启，贾锡印)，哈尔滨船舶工程学院船舶动力工程系(徐漫平) |
| |
| 摘 要： | 利用回弹法分析实测凸轮,应用电算拟合,给出一种由实测所得的升程表,从而得到确定凸面圆弧凸轮的参数及其运动规律的方法,并将此法应用于D 234油泵凸轮的国产化实例计算中,达到预期的效果.
|
| 关 键 词： | 回弹法 三次样条函数 光顺法 柴油机 喷油泵 |
Analysis of Measured Displacement of Fuel Injection Pump Cam Follower and Calculation of its Movemet Law |
| |
| Tang Houqi, Jia Xiyin, Xu Manping.Analysis of Measured Displacement of Fuel Injection Pump Cam Follower and Calculation of its Movemet Law[J].Journal of Harbin Engineering University,1989(4). |
| |
| Authors: | Tang Houqi Jia Xiyin Xu Manping |
| |
| Affiliation: | Dept. of Marine Power Eng. |
| |
| Abstract: | The iterative method is utilized to analyse the measured displacement of fuel injection pump cam follower.By means of regression, it gives out a measured displacement table of cam follower and then concludes a determin-ing method for convex flank cam parameter and its movement law.With the method, a expected result is obtained through the practical measuring calculation in the domestic design of fuel injection cam of diesel engine D234. |
| |
| Keywords: | iterative method cubic spline interpolationl function smooth finish method diesel engines injection pumps |
| 本文献已被 CNKI 等数据库收录！ |
