| 反渗透膜元件标准化产水量数学模型的优化 |
| |
| 引用本文： | 罗美莲,靖大为,朱建平,严丹燕,杨小奇. 反渗透膜元件标准化产水量数学模型的优化[J]. 天津城市建设学院学报, 2010, 16(3): 193-195,204 |
| |
| 作者姓名： | 罗美莲 靖大为 朱建平 严丹燕 杨小奇 |
| |
| 作者单位： | 天津城市建设学院,膜技术研究中心,天津,300384 |
| |
| 摘 要： | 通过正交实验,量化了反渗透膜元件产水量标准化模型的偏差,明确了给水盐浓度是影响模型计算结果准确性的最显著因素.通过引入修正系数α,对模型中的给水盐浓度校正系数进行了修正.结果表明,修正后的模型显著提高了计算结果的准确性.
|
| 关 键 词： | 反渗透膜 标准化产水量 模型优化 |
The Optimization of the Normalization Model of RO Membrane Elements' Permeate Flow |
| |
| LUO Mei-lian,JING Da-wei,ZHU Jian-ping,YAN Dan-yan,YANG Xiao-qi. The Optimization of the Normalization Model of RO Membrane Elements' Permeate Flow[J]. Journal of Tianjin Institute of Urban Construction, 2010, 16(3): 193-195,204 |
| |
| Authors: | LUO Mei-lian JING Da-wei ZHU Jian-ping YAN Dan-yan YANG Xiao-qi |
| |
| Affiliation: | LUO Mei-lian,JING Da-wei,ZHU Jian-ping,YAN Dan-yan,YANG Xiao-qi(Membrane Technology Research Center,TIUC,Tianjin 300384,China) |
| |
| Abstract: | Through orthogonal experiments,this paper quantifies the deviations produced by the normalization model of RO membrane elements’ permeate flow,and shows that the most significant factor affecting the accuracy result of the model is feed concentration.The correction factor of feed concentration is further amended by introducing a cor-rection coefficient α.The results indicate that the accuracy of the optimized model is improved significantly. |
| |
| Keywords: | RO membrane permeate flow normalization model optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
