| 大厚度比镍基高温合金构件的焊接工艺 |
| |
| 引用本文： | 朱朝晖. 大厚度比镍基高温合金构件的焊接工艺[J]. 金属功能材料, 2013, 0(6): 5-8 |
| |
| 作者姓名： | 朱朝晖 |
| |
| 作者单位： | 苏州大学阳澄湖校区机械工程系,江苏苏州215131 |
| |
| 摘 要： | 基于Inconel718镍基高温合金材料的可焊性分析以及对大厚度比焊接件的结构分析,以1mm厚度的薄壁件为切入点研究了采用与不采用辅助夹具进行焊接定位的施焊效果。采用钨极脉冲氩弧焊方法使用辅助夹具对0.8mm厚度薄板进行焊接工艺试验,获得熔合良好的接头。大厚度比(1∶11)构件的焊接工艺应以控制热输入与防止薄壁件变形为原则,通过分析结构特点可利用夹具进行定位、辅助散热的作用制定出有效的焊接工艺。
|
| 关 键 词： | 焊接工艺 镍基高温合金 厚度比 |
Welding Process of Large Thickness Ratio Ni-Based Superalloy Structure |
| |
| ZHU Zhao-hui. Welding Process of Large Thickness Ratio Ni-Based Superalloy Structure[J]. Metallic Functional Materials, 2013, 0(6): 5-8 |
| |
| Authors: | ZHU Zhao-hui |
| |
| Affiliation: | ZHU Zhao-hui;Mechanical Engineering Department,Soochow University-Yangcheng Lake Campus; |
| |
| Abstract: | Based on weldability analysis of Inconel 718 superalloy and structure analysis of large thickness ration weldment,focus attention on 1mm thin-walled part to compare welding effects by using auxiliary fixture on welded unit or not.Good fusion joint was obtained by using auxiliary fixture for welding process test on 0.8mm thickness plate with argon tungsten pulsed arc welding method.Controlling heat input and preventing deformation of thin-walled parts should be considered to be the welding guide principle for large thinness ratio（1∶11）structure.Making effective welding process depend on analysis of structure characteristics and utilizing auxiliary fixture to help location or cooling. |
| |
| Keywords: | welding process Ni-based superalloy thickness ratio |
| 本文献已被 CNKI 维普 等数据库收录！ |
