| 45#钢电子束表面相变硬化过程温度场的计算效率分析 |
| |
| 引用本文： | 杨雄,徐亮,陈虎城,刘栋.45#钢电子束表面相变硬化过程温度场的计算效率分析[J].广西机械,2013(12):220-221,224. |
| |
| 作者姓名： | 杨雄 徐亮 陈虎城 刘栋 |
| |
| 作者单位： | [1]上汽通用五菱汽车股份有限公司,广西柳州545007 [2]桂林电子科技大学,广西桂林541004 |
| |
| 基金项目： | 广西壮族自治区教育厅项目（编号：2013YB098）;广西制造系统与先进制造技术重点实验室主任课题（编号：桂科能10-046-07_005）;桂林市科技计划项目（编号：20120118-4）. |
| |
| 摘 要： | 根据热传导和电子束焊机的工作环境,模拟了电子束扫描45#钢表面相变硬化过程中的温度场.分别采用直接求解和迭代求解方法,比较了同一网格和复合网格两种模式下温度场的计算.结果表明：在保证计算精度的同时,复合网格划分的计算效率远高于同一网格划分;直接求解比迭代求解所耗内存大.
|
| 关 键 词： | 45钢 电子束 相变硬化 模拟效率 |
The Computational Efficiency Analysis of Temperature Field During the Process of Electron Beam Surface Transformation Hardening to 45 Steel |
| |
| YANG Xiong,XU Liang,CHEN Hu-Cheng LIU Dong.The Computational Efficiency Analysis of Temperature Field During the Process of Electron Beam Surface Transformation Hardening to 45 Steel[J].Guangxi Machinery,2013(12):220-221,224. |
| |
| Authors: | YANG Xiong XU Liang CHEN Hu-Cheng LIU Dong |
| |
| Affiliation: | 1. Saic GM WuLing Automobile Company Limited, LiuZhou 545007, China; 2. School of Mechanical＆ Electrical Engineering, Guilin 541004, China) |
| |
| Abstract: | According to the working environment of the heat conduction and electron beam welding machine, the temperature field were simulated during the process of transformation hardening when the electron beam was scanning the surface of 45 steel. Direct and iterative solution was used respectively. The calculation of temperature field was compared in the two patterns of the same grid and the composite grid. The results showed that the calculation efficiency of complex grid partition was obviously higher than the same grid partition when the accuracy was same. The results also showed that the memory of direct solving method was bigger than the iteration method. |
| |
| Keywords: | 45 steel electron beam phase transformation hardening efficiency |
| 本文献已被 维普 等数据库收录！ |
