| 浮法玻璃冷端生产线传动辊道速度调试与应用 |
| |
| 引用本文： | 殷蕊. 浮法玻璃冷端生产线传动辊道速度调试与应用[J]. 玻璃, 2012, 39(9): 40-41 |
| |
| 作者姓名： | 殷蕊 |
| |
| 作者单位： | 秦皇岛奥格玻璃有限公司,秦皇岛市,066000 |
| |
| 摘 要： | 本调试针对BOTrERO冷端生产线主线传动速度进行，根据对跑片率、落板率、是否需要降低产量及检修时间等各项生产指标的影响，得出如下最适宜传送速度，即在700t／d熔化能力条件下，玻璃规格L×W：（1650×2）×2250mm，传动速度为63m/min；玻璃规格L×W=（2000×2）×1500mm，传动速度为66m／min；在750t／d熔化能力条件下，玻璃规格Lxw=（1650×2）×2250mm，传动速度为69rrdmin；玻璃规格L×W=（2000×2）×1500mm，传动速度为72m／min。
|
| 关 键 词： | 浮法玻璃 冷端 辊道传送 速度 |
Speed Adjustment and Application of Transmission Rollers on Cold-end of Float Glass Production Line |
| |
| Yin Rui. Speed Adjustment and Application of Transmission Rollers on Cold-end of Float Glass Production Line[J]. Class, 2012, 39(9): 40-41 |
| |
| Authors: | Yin Rui |
| |
| Affiliation: | Yin Rui(Qinhuangdao Ao-ge glass Co.,Ltd.,Qinhuangdao,066004) |
| |
| Abstract: | The speed of transmission rollers on BOTTERO cold-end was adjusted.By taking account of the following factors,off-track degree and fall-down rate of the glass sheet,whether it needs to reduce yield,whether it needs time for repairing,optimal transmission speed were obtained as follows:the transmission speed should be at 63 m/min for melting capacity of 700t/d and sheet dimension of L×W=(1650×2)×2250 mm,66 m/min for melting capacity of 700t/d and sheet dimension of L×W=(2000×2)×1500 mm,69 m/min for melting capacity of 750t/d and sheet dimension of L×W=(1 650×2)×2 250 mm,72 m/min for melting capacity of 750t/d and sheet dimension of L×W=(2000×2)×1500 mm. |
| |
| Keywords: | float glass cold end roller transmission speed |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
