| 平整机组湿平整吹风系统改造 |
| |
| 引用本文： | 曹丕智,付薇. 平整机组湿平整吹风系统改造[J]. 鞍钢技术, 2007, 0(1): 43-45. DOI: 10.3969/j.issn.1006-4613.2007.01.012 |
| |
| 作者姓名： | 曹丕智 付薇 |
| |
| 作者单位： | 鞍钢股份有限公司冷轧薄板厂;鞍钢股份有限公司冷轧薄板厂 |
| |
| 摘 要： | 鞍钢冷轧薄板厂平整机组钢板存在边部平整液残留缺陷,为此,自行设计、制造了相关设备,对湿平整吹风系统进行了改造,取得了良好的效果,平整后产品的合格率由75%提高到90%.
|
| 关 键 词： | 平整机组 湿平整吹风系统 平整液残留 |
| 文章编号： | 1006-4613（2007）01-0043-03 |
| 收稿时间： | 2006-09-15 |
| 修稿时间： | 2006-09-15 |
Wet Skin Pass Blowing System Modernization of Skin Pass Mills |
| |
| Cao Pizhi,Fu Wei. Wet Skin Pass Blowing System Modernization of Skin Pass Mills[J]. Aisc Techniques, 2007, 0(1): 43-45. DOI: 10.3969/j.issn.1006-4613.2007.01.012 |
| |
| Authors: | Cao Pizhi Fu Wei |
| |
| Abstract: | Because of skin pass liquid remaining on the side of the steel sheet in the skin pass mills in Angang Cold Rolled Sheet Plant, the wet skin pass blowing system is revamped by the selfdesigned and produced relevant equipments. Good results are achieved and the product pass percent is increased from 75% to 90% after being skinned. |
| |
| Keywords: | skin pass mill wet skin pass blowing system skin pass liquid remaining |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
