首页 | 本学科首页   官方微博 | 高级检索  
     

基于三步隐式Adams法的同步电机阻尼绕组电流计算
引用本文:吴 楠,李尚盛,孙建军. 基于三步隐式Adams法的同步电机阻尼绕组电流计算[J]. 电测与仪表, 2016, 53(2): 57-61. DOI: 10.3969/j.issn.1001-1390.2016.02.010
作者姓名:吴 楠  李尚盛  孙建军
作者单位:武汉大学电气工程学院,武汉,430072
摘    要:提出采用精度更高、绝对稳定域更大的三步隐式Adams法对现有的阻尼绕组电流计算方法(一阶向前差分法,R-K1)进行改进,并分析了初值设置和采样频率对算法的影响,结果表明改进的方法具有对于同步电机阻尼绕组实际电流的更好的跟踪特性。文中以基于PSCAD的IEEE次同步谐振第一标准模型为例,通过仿真验证与对比分析,体现了采用三步隐式Adams法计算阻尼绕组电流的优越性。

关 键 词:阻尼绕组电流计算  绝对稳定域  同步电机  三步隐式Adams法
收稿时间:2014-12-19
修稿时间:2014-12-19

Calculation of Synchronous Generator Damper Winding Current based on Three Step Implicit Adams Method
Wu Nan,Li Shangsheng and Sun Jianjun. Calculation of Synchronous Generator Damper Winding Current based on Three Step Implicit Adams Method[J]. Electrical Measurement & Instrumentation, 2016, 53(2): 57-61. DOI: 10.3969/j.issn.1001-1390.2016.02.010
Authors:Wu Nan  Li Shangsheng  Sun Jianjun
Affiliation:School of Electrical Engineering,Wuhan University,Hubei Wuhan,School of Electrical Engineering,Wuhan University,Hubei Wuhan,School of Electrical Engineering,Wuhan University,Hubei Wuhan
Abstract:The three step implicit Adams method which has higher accuracy and lager absolute stability region is proposed to improve now existing damper winding current calculation (one step forward difference method). Also, the effect of initial value setting and sampling frequency to algorithm is analyzed. Results show that improved method has better performance on tracking damper winding current of synchronous generator. By calculating damper current of synchronous generator in IEEE first bench case for SSR in PSCAD with simulation and comparison, advantage of the three step implicit Adams method is testified.
Keywords:damping winding current calculation  absolute stability region  synchronous generator  three step implicit Adams method
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《电测与仪表》浏览原始摘要信息
点击此处可从《电测与仪表》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号