| Fe-Cr-Mo合金颗粒对磁流变弹性体损耗因子的影响 |
| |
| 引用本文： | 王以伟,郝江江,陈盼,胥永刚.Fe-Cr-Mo合金颗粒对磁流变弹性体损耗因子的影响[J].材料科学与工艺,2015,23(6):109-113. |
| |
| 作者姓名： | 王以伟 郝江江 陈盼 胥永刚 |
| |
| 作者单位： | 1. 西南交通大学材料学院 材料先进技术教育部重点实验室,成都,610031;2. 成都三航机电有限责任公司,成都,610091 |
| |
| 基金项目： | 国家自然科学基金(11172248). |
| |
| 摘 要： | 为改善磁流变弹性体(MRE)的阻尼性能,使用Fe-Cr-Mo合金颗粒(通过电火花方法制备得到)与硅橡胶混合制备得到了MRE样品.利用DHVTC振动测试系统测试了MRE在0~500 m T磁场范围内的动态剪切性能(激振频率为5 Hz,应变振幅为1.90%).重点研究了Fe-Cr-Mo颗粒对MRE的损耗因子的影响.结果表明,Fe-Cr-Mo合金颗粒含量达到70%时,MRE的零场损耗因子具有最大值0.24.此外,当磁场强度达到500 m T时,MRE(颗粒含量为60%)的损耗因子增加了13%.增加MRE中Fe-Cr-Mo合金颗粒含量,或者增大外磁场都会导致MRE损耗因子的提高.
|
| 关 键 词： | 磁流变弹性体(MRE) 动态力学性能 Fe-Cr-Mo软磁颗粒 应力-应变曲线 损耗因子 |
| 收稿时间： | 2015/7/21 0:00:00 |
Influence of Fe-Cr-Mo alloy particles on loss factor of magnetorheological elastomers |
| |
| WANG Yiwei,HAO Jiangjiang,CHEN Pan and XU Yonggang.Influence of Fe-Cr-Mo alloy particles on loss factor of magnetorheological elastomers[J].Materials Science and Technology,2015,23(6):109-113. |
| |
| Authors: | WANG Yiwei HAO Jiangjiang CHEN Pan and XU Yonggang |
| |
| Affiliation: | Key Laboratory for Advanced Technologies of Materials, The Ministry of Education of China, Southwest Jiaotong University, Chengdu 610031, Chain,Key Laboratory for Advanced Technologies of Materials, The Ministry of Education of China, Southwest Jiaotong University, Chengdu 610031, Chain,Chengdu Sanhang Electromechanic Inc, Chengdu 610091, Chain and Key Laboratory for Advanced Technologies of Materials, The Ministry of Education of China, Southwest Jiaotong University, Chengdu 610031, Chain |
| |
| Abstract: | Loss factor is an important parameter to evaluate magnetorheologcial elastomers (MRE). In this paper, the Fe-Cr-Mo alloy particles were prepared by using an electric discharge machine. The soft magnetic particles were filled in a silicone rubber to prepare the MRE, and their dynamic shear properties in the range of 0 mT to 500 mT magnetic field were measured by DHVTC vibration system. The excitation frequency is 5 Hz, and the strain amplitude is about 1.90%. The influence of Fe-Cr-Mo particles on the loss factor of the MRE was discussed in the paper. It is found that the loss factor of the MRE increases as the particle content varies from 40% to 70%. The sample containing 70% particles owns the highest loss factor of 0.24 under 0 mT. In addition, the higher magnetic field causes the larger loss factor. The loss factor of the sample with 60% particles increases by 13% with the magnetic field changing from 0 mT to 500 mT. |
| |
| Keywords: | magnetorheological elastomer dynamic mechanical properties Fe-Cr-Mo soft magnetic particles stress-strain curves loss factor |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《材料科学与工艺》浏览原始摘要信息 |
|
点击此处可从《材料科学与工艺》下载全文 |
|
