首页 | 本学科首页   官方微博 | 高级检索  
     

工程结构中的阻尼与复振型地震响应的完全平方组合
引用本文:周锡元,马东辉,俞瑞芳. 工程结构中的阻尼与复振型地震响应的完全平方组合[J]. 土木工程学报, 2005, 38(1): 31-39
作者姓名:周锡元  马东辉  俞瑞芳
作者单位:1. 中国建筑科学研究院北京工业大学
2. 北京工业大学
摘    要:对工程结构中阻尼矩阵的简化处理途径做了简要评述 ,指出目前常用的比例阻尼理论对于小阻尼结构是适用的。但是随着机械阻尼器在结构工程中的广泛应用 ,结构的阻尼矩阵不再满足可以按照相应无阻尼结构振型解耦的条件 ,此时的振型是由实部和虚部组成的复数形式。由于缺乏基于反应谱的复振型地震反应叠加分析方法 ,也是为了简单起见 ,在抗震设计规范中建议采用强迫解耦的近似分析方法。文中对强迫解耦方法的基本概念和适用性进行了探讨 ,指出在一般情况下这一方法是可以接受的 ,但是对于过阻尼和其它特殊情况 ,误差也是比较大的。为了避免这样的误差 ,可以采用文中推荐的基于复振型的完全平方组合 (CCQC)方法。与目前常用的CQC法相比 ,文中建议的CCQC法是按照同样的假定在复振型条件下推导出来的近似分析方法 ,完全避免了复数运算 ,表达方式也一样简单实用 ,因此很适合在实际工程和抗震设计规范中应用。此外文中还讨论和介绍了在比例阻尼和非比例阻尼条件下如何将CQC和CCQC方法加以推广应用于多维地震输入的情况

关 键 词:阻尼  复振型叠加法  SRSS法  CQC法  CCQC法  强迫解耦法  CQC3法  SRSS3法
文章编号:1000-131X(2005)01-0031-09
修稿时间:2004-10-28

DAMPING IN STRUCTURES AND COMPLETE QUDRATIC COMBINATION (CCQC) OF COMPLEX MODE SEISMIC RESPONSES
Zhou Xiyuan,Ma Donghui,Yu Ruifang. DAMPING IN STRUCTURES AND COMPLETE QUDRATIC COMBINATION (CCQC) OF COMPLEX MODE SEISMIC RESPONSES[J]. China Civil Engineering Journal, 2005, 38(1): 31-39
Authors:Zhou Xiyuan  Ma Donghui  Yu Ruifang
Affiliation:1.China Academy of Building Research; 2.Beijing University of Technology
Abstract:A simplified approach in dealing with damping in structures is reviewed in this paper.It is pointed out that the proportional damping theory is adaptable for small damping structures.However as the mechanical damper is widely employed in structure engineering,the structural damping no longer satisfies the decoupling condition corresponding to the structural modes without damping,and the modes usually are in terms of complex variables.Due to the lack of complex mode response spectral superposition methodology for non-proportional damping systems and the purpose of simplification as well,the forced decoupling approach is proposed in seismic design code.The discussion in this paper is pointing out the basic concept and availability of the forced decoupling approach.It is pointed out that this approach is adoptable in general but considerable errors would be involved in case of very large damping.In order to avoid such errors,adopting complex complete quadratic combination (CCQC) method based on complex modes is a good solution.Comparing with normal complete quadratic combination (CQC) method,the proposed CCQC method is an approximate method based on the same assumptions as normal CQC method.It is also as concise as normal CQC and completely free of complex value calculation,and thus is adaptive in seismic design code.In addition,how to popularize these methods including CQC and CCQC methods into multi-component earthquake input is discussed and reviewed in this paper.
Keywords:damping  complex mode superposition method  SRSS method  CQC method  CCQC method  forced decoupling approach  CQC3 method  SRSS3 method
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号