首页 | 本学科首页   官方微博 | 高级检索  
     

浓硫酸催化脱臭馏出物脂肪酸甲酯化工艺研究
引用本文:鲁志成,谷克仁,冶保献,李俊峰. 浓硫酸催化脱臭馏出物脂肪酸甲酯化工艺研究[J]. 粮食与油脂, 2005, 0(3): 21-23
作者姓名:鲁志成  谷克仁  冶保献  李俊峰
作者单位:1. 力必浩(上海)油脂设备有限公司,上海,200135;河南工业大学,郑州,450002
2. 河南工业大学,郑州,450002
3. 郑州大学,郑州,450052
摘    要:通过改变甲醇用量、温度、时间、催化剂用量等各种条件对脂肪酸甲酯化过程进行控制。研究 表明:脱臭馏出物脂肪酸甲酯化适宜条件为:溶剂:原料(V/w)=1.1:1;甲酯化时间:2小时;甲酯化 温度:60℃;催化剂:原料(V/W)=0.01:1,在该条件下,脂肪酸甲酯化率达到98%。

关 键 词:大豆油脱臭馏出物  脂肪酸  甲酯化  浓硫酸
文章编号:1008-9578(2005)03-0021-03
修稿时间:2005-01-20

Studies on Methyl Esterification of Fatty Acid in Soybean Oil Deodorizer Distillate Catalyzed by Oil of Vitriol
LU Zhi-cheng,GU Ke-ren,YE Bao-xian,LI Jun-feng. Studies on Methyl Esterification of Fatty Acid in Soybean Oil Deodorizer Distillate Catalyzed by Oil of Vitriol[J]. Cereals & Oils, 2005, 0(3): 21-23
Authors:LU Zhi-cheng  GU Ke-ren  YE Bao-xian  LI Jun-feng
Affiliation:LU Zhi-cheng,GU Ke-ren,YE Bao-xian3,LI Jun-feng
Abstract:Esterification process of soybean oil deodorizer distillate is mentioned in .this thesis, Ester-ification rate can be controlled by altering solvent-to-material ratio, esterification time, esterification temperature, catalyst-to-material ratio, and other conditions. Results suggest that the optimum esterification conditions are as follows: solvent:material (V/W)= 1.1:1, esterification time is 2 hours, temperature is 60℃, catalyst:material (V/W) = 0.01:1. under this condition the esterification rate is 98%.
Keywords:soybean oil deodorizer distillate  fatly acid  methyl esteriflcation  oil of ritriol  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号