| 基于ANSYS的HC冷轧机辊系变形研究 |
| |
| 引用本文： | 张皖菊,刘智.基于ANSYS的HC冷轧机辊系变形研究[J].冶金设备,2013(1):11-14. |
| |
| 作者姓名： | 张皖菊 刘智 |
| |
| 作者单位： | 1. 安徽工业大学材料科学与工程学院实验中心 安徽马鞍山243002
2. 安徽工业大学机械工程学院 安徽马鞍山243002 |
| |
| 摘 要： | 建立了1720HC冷轧机工作机座的有限元模型，按1#轧机现场实际施加轧制力及载荷、约束后进行有限元模拟。计算了三种工况，分析弯辊技术、窜辊技术对轧辊有载辊缝形状的影响，进而为提高板形质量提供理论参考。
|
| 关 键 词： | HC冷轧机 有限元法 弯辊 窜辊 |
Rolls Deformation Research of HC Cold Mill Based on ANSYS |
| |
| Zhang Wanju
,
Liu Zhi.Rolls Deformation Research of HC Cold Mill Based on ANSYS[J].Metallurgical Equipment,2013(1):11-14. |
| |
| Authors: | Zhang Wanju Liu Zhi |
| |
| Affiliation: | 1:Experimental Center,School of Metallurgical and Materials,Anhui University of Technology,Ma′Anshan 243002; 2:School of Mechanical Engineering,Anhui University of Technology,Ma′Anshan 243002) |
| |
| Abstract: | The paper established the finite element analytical model of the housing of the 1720 HC cold mill, which is simulated by FEM method after applying the rolling force, load and bondage and constraint according the prac- tice of 1# mill. In the paper, the three working conditions are calculated which the effect from roll bending technique and roll shifting technique to the roll gap, and then provide theoretical reference to increase the quality of strip profile. |
| |
| Keywords: | HC Cold Mill Finite Element Method Roll Bending Roll Shifting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
