| 全自动划片机的关键技术研究 |
| |
| 引用本文： | 王明权,王宏智.全自动划片机的关键技术研究[J].电子工业专用设备,2007,36(2):28-32,38. |
| |
| 作者姓名： | 王明权 王宏智 |
| |
| 作者单位： | 中国电子科技集团公司第四十五研究所,北京东燕郊,101601;中国电子科技集团公司第四十五研究所,北京东燕郊,101601 |
| |
| 摘 要： | 根据微电子工业的发展现状,论述发展全自动划片机的必要性;从全自动划片机的工作机理出发,分析空气静压电主轴、晶圆传输定位、自动对准、自动清洗等全自动划片机的关键技术;依据分析结果提出相应的解决措施。
|
| 关 键 词： | 空气静压电主轴 晶圆传输定位 自动对准 自动清洗 |
| 文章编号： | 1004-4507（2007）02-0028-05 |
| 修稿时间： | 2006-12-20 |
Study on Key Technologies of Full Auto Dicing Saw |
| |
| WANG Ming-quan,WANG Hong-zhi.Study on Key Technologies of Full Auto Dicing Saw[J].Equipment for Electronic Products Marufacturing,2007,36(2):28-32,38. |
| |
| Authors: | WANG Ming-quan WANG Hong-zhi |
| |
| Affiliation: | The 45th Institute of CETC, Beijing East Yanjiao 101601, China |
| |
| Abstract: | The necessity of developing full auto dicing saw is discussed according to development status of microelectronic industry. The key technologies of Auto dicing saw, such as air spindle, transfer and orientation of wafer, automatic alignment and automatic wash are analyzed. According to the analytic result, measures were put forward to solve problems. |
| |
| Keywords: | Air spindle Transfer and orientation of wafer Automatic alignment Automatic wash |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
