首页 | 本学科首页   官方微博 | 高级检索  
     

互感输电线路零序分布参数带电测量方法研究
引用本文:郭建全,胡志坚,郭建新,湛锋,胡宁.互感输电线路零序分布参数带电测量方法研究[J].高压电器,2005,41(6):425-427,440.
作者姓名:郭建全  胡志坚  郭建新  湛锋  胡宁
作者单位:武汉大学电气工程学院,湖北,武汉,430072;河北省邢台县供电局,河北,邢台,054000
摘    要:电力工程上不但需要知道互感线路的零序集总参数, 有时还需要知道分布参数。通过对线路端电气量的同步测量,可以计算得到线路的集总参数,继而可以分别对互感部分和非互感部分求取线路的分布参数。笔者首先给出了输电线路分布参数模型和集总参数模型之间的转化公式;在此基础上,提出了互感线路分布参数在线测量方法,并通过仿真试验对所提出的方法进行了验证。

关 键 词:参数带电测量  零序  分布参数  集总参数  输电线路
文章编号:1001-1609(2005)06-0425-03
收稿时间:2005-07-22
修稿时间:2005-07-222005-09-24

Study on Zero-sequence Distributed Parameter Live Line Measurement of Transmission Lines with Mutual Inductance
GUO Jian-quan,HU Zhi-jian,GUO Jian-xin,ZHAN Feng,HU Ning.Study on Zero-sequence Distributed Parameter Live Line Measurement of Transmission Lines with Mutual Inductance[J].High Voltage Apparatus,2005,41(6):425-427,440.
Authors:GUO Jian-quan  HU Zhi-jian  GUO Jian-xin  ZHAN Feng  HU Ning
Affiliation:1. Department of Electrical Engineering, Wuhan University, Wuhan 430072 China; 2. Xingtai County Power Company, Xingtai 054000, China
Abstract:Not only the zero-sequence lumped parameters of the transmission lines but also the distributed ones are needed to measure. Through synchronous measuring the voltage and current on the ends rameters can be calculated, considering the length of line with mutual inductance can of the lines, the lumped paand the distribute parameters and the length of the section be obtained. First, the distributed parameter model and the lumped parameter model of transmission line are given. Then, the conversion formulae between each other are also given. Based on them, this paper brings forward a method of zero-sequence distributed parameters measurement under operation. Finally, the simulating tests are carried out to prove this method.
Keywords:parameter measurement under operation  zero-sequence  distributed parameter  lumped parameter  transmission line
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号