| 1000kN模具研配压力机机架有限元分析及优化设计 |
| |
| 引用本文： | 汤志源,李凯岭,易奇昌.1000kN模具研配压力机机架有限元分析及优化设计[J].锻压装备与制造技术,2009,44(5):68-71. |
| |
| 作者姓名： | 汤志源 李凯岭 易奇昌 |
| |
| 作者单位： | 山东大学,机械工程学院,山东,济南,250061 |
| |
| 摘 要： | 利用Cosmos Works对模具研配压力机的机架进行了有限元静力分析，求出了机架的应力和变形分布情况。根据静力学分析结果，对整个机架进行结构参数优化设计，使机架重量减少了9．28％，获得了良好的结构参数。对模具研配压力机框架式机架的设计提供了新的思路和方法。
|
| 关 键 词： | 机械制造 机架 有限元 优化设计 模具研配压力机 |
FEA and Optimum Design for Frame of 100T Hydraulic Die Spotting Press |
| |
| TANG Zhiyuan,LI Kailing,YI Qichang.FEA and Optimum Design for Frame of 100T Hydraulic Die Spotting Press[J].China Metalforming Equipment & Manufacturing Technology,2009,44(5):68-71. |
| |
| Authors: | TANG Zhiyuan LI Kailing YI Qichang |
| |
| Affiliation: | TANG Zhiyuan,LI Kailing,YI Qichang(School of Mechanical Engineering,Shandong University,Jinan 250061,Shandong China) |
| |
| Abstract: | The finite element analysis of the frame for 100T hydraulic die spotting press has been conducted by using COSMOSWorks,from which the stress and deformation of the frame have been obtained.Based on the results of analysis,the frame structure has been optimum designed which is reduced by 9.28% comparing with the original frame.The results of optimum design indicate that the frame satisfies the requirement of frame design.A new method for optimization of the frame design in die spotting press has been provide... |
| |
| Keywords: | Frame FEM Optimum design Hydraulic die spotting press |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
