首页 | 本学科首页   官方微博 | 高级检索  
     

CPU散热器结构设计与热分析
引用本文:周建辉,杨春信.CPU散热器结构设计与热分析[J].电子机械工程,2006,22(6):16-18,60.
作者姓名:周建辉  杨春信
作者单位:北京航空航天大学航空科学与工程学院,北京,100083;北京航空航天大学航空科学与工程学院,北京,100083
摘    要:CPU散热器是将CPU核心热量迅速导出的关键,已成为获得新一代电子芯片的主要问题之一。采用数值模拟方法对放射状太阳花CPU散热器进行三维流场及温度场分析,探讨放射状散热器在不同的肋片形状、肋片数N和肋片厚度等各种不同的参数作用下,对于整体散热器散热和流动性能的变化与影响,同时分析了太阳花散热器自然对流和瞬时动态特性。

关 键 词:CPU散热器  数值模拟  热阻  压力系数
文章编号:1008-5300(2006)06-0016-03
收稿时间:2006-03-31
修稿时间:2006-03-31

Design and Thermal Analysis of CPU Heat Sink
ZHOU Jian-hui and YANG Chun-xin.Design and Thermal Analysis of CPU Heat Sink[J].Electro-Mechanical Engineering,2006,22(6):16-18,60.
Authors:ZHOU Jian-hui and YANG Chun-xin
Affiliation:School of Aeronautic Science and Engineering, Belling University of Aeronautics and Astronautics, Beijing 100083, China
Abstract:Heat sink is the key component of heat removal from CPU rapidly and has became one of the main problems in the new generation of electronic chips. Computational fluid dynamic is used in this paper to simulate the flow and heat transfer of radiation-shaped heat sinks to explore overall thermal and fluid performances under various parameters such as fin profile, density of fins ,fin thickness. Finally, natural convection and instantaneous dynamic characteristics are also analyzed.
Keywords:heat sink  numerical simulation  thermal resistance  pressure coefficient
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《电子机械工程》浏览原始摘要信息
点击此处可从《电子机械工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号