| 基于UGNX的异型石材多功能复合加工中心数控加工与仿真技术研究 |
| |
| 引用本文： | 张贺,郭桦,肖楠.基于UGNX的异型石材多功能复合加工中心数控加工与仿真技术研究[J].沈阳工程学院学报(自然科学版),2010,6(2):175-178. |
| |
| 作者姓名： | 张贺 郭桦 肖楠 |
| |
| 作者单位： | 1. 沈阳建筑大学,交通与机械工程学院,沈阳,110168
2. 沈阳工程学院,技术经济系,沈阳,110136 |
| |
| 基金项目： | 国家科技支撑计划，建设部科学研究项目，辽宁省重点实验室开放基金，辽宁省十一五重点实验室开放基金 |
| |
| 摘 要： | 异型石材多功能复合加工中心SYH4608由8轴双5联动系统组成,为使其获得高效、可靠的加工程序,通过对异型石材加工的典型零件程序编制和UGNX软件后处理器UG/POS的二次开发,建立了异型石材加工程序高效编制系统,并使用VER ICUT软件对所产生加工程序进行了加工仿真及验证.得到了罗马柱石材模型的刀具加工轨迹,并验证了其合理性;建立了专门针对SYH4608异型多功能复合加工中心的后处理器,通过该后处理器生成了可靠的NC程序;通过VER ICUT软件对NC程序进行加工仿真,其结果验证了数控编程的可靠性以及机床的加工性能和后处理器的高效性,为异型石材数控加工技术的后续研究提供了技术基础.
|
| 关 键 词： | UGNX UG/POST 加工中心 加工仿真 |
Research on NC machining and simulation of heterotypic stone multi-function composite machining center based on UGNX |
| |
| ZHANG He,GUO Ha,XIAO Nan.Research on NC machining and simulation of heterotypic stone multi-function composite machining center based on UGNX[J].Journal of Shenyang Institute of Engineering:natural Science,2010,6(2):175-178. |
| |
| Authors: | ZHANG He GUO Ha XIAO Nan |
| |
| Affiliation: | ZHANG He1,GUO Ha2,XIAO Nan2(1.College of Traffic & Mechanical Engineering,Shenyang Jian Zhu University,Shenyang 110168,China,2.Department of Technology & Economics,Shenyang Institute of Engineering,Shenyang 110136,China) |
| |
| Abstract: | YH4608 is a multi-axis double five axes linkage heterotypic stone complex machining center.The purpose of this paper is to gain high efficiency and reliable NC program for SYH4608 based on UGNX.High efficiency programming system of heterotypic stone was built from the programming of heterotypic stone typical parts and the secondary development of the postprocessor of UG/POST.NC program produced from VERICUT was machining simulated and verified.Tool machining track of roman column was got and verified.The po... |
| |
| Keywords: | UGNX UG/POST |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
