Enhancing antibacterial properties of polypropylene/Cu‐loaded montmorillonite nanocomposite filaments through sheath–core morphology

Polypropylene (PP) loaded with copper‐exchanged montmorillonite (Cu‐MMT) nanocomposite filaments and films with excellent antimicrobial activity have been reported for the first time. A sheath–core morphology filament in which only the sheath contains Cu‐MMT was prepared for maximizing bioactivity. Sodium MMT clay was modified to acid‐activated MMT and further to Cu‐MMT via an ion exchange process. The exchange operation was confirmed using wide‐angle X‐ray diffraction and energy‐dispersive X‐ray spectroscopy (EDX) which suggested increased interlayer spacing and confirmed the loading of copper in Cu‐MMT. Further, Cu‐MMT was melt‐mixed in PP in the form of PP/Cu‐MMT nanocomposite filament, film and sheath–core morphology PP/Cu‐MMT nanocomposite filament. The surface morphology and elemental composition of the nanocomposites were studied using scanning electron microscopy coupled with EDX. Transmission electron micrographs were obtained to understand the dispersion characteristics of Cu‐MMT phase in PP. X‐ray diffraction analysis of nanocomposites suggested increased crystallinity at lower loading due to heterogeneous nucleating action of MMT. The PP nanocomposite filaments and films were tested for antimicrobial activity against Gram‐negative bacterium Escherichia coli, which is the main pathogenic bacterium found abundantly in water, and were found to exhibit excellent antimicrobial activity. © 2018 Society of Chemical Industry