| 冷轧板制管麻点缺陷成因及其预防措施 |
| |
| 引用本文： | 郭太雄,邓函,赵孝章. 冷轧板制管麻点缺陷成因及其预防措施[J]. 轧钢, 2010, 27(5): 49-51 |
| |
| 作者姓名： | 郭太雄 邓函 赵孝章 |
| |
| 作者单位： | 攀钢集团研究院有限公司 |
| |
| 摘 要： | 通过对St12冷轧板制管过程中出现麻点缺陷处的形貌、微观化学成分和组织的分析,得出其原因是制管加工变形量正好位于钢坯(由IF钢改判St12)的临界变形区域,因此钢管退火后晶粒异常粗大,拉拔时形成了麻点缺陷。采取使制管加工变形量避开材料临界变形区域的措施,可有效预防麻点缺陷的产生。
|
| 关 键 词： | 冷轧板 焊管 麻点 临界变形量 |
Causes Analysis and Prevention Measures of Pockmark in Tube-making with Cold Rolled Sheet |
| |
| GUO Tai-xiong,DENG Han,ZHAO Xiao-zhang. Causes Analysis and Prevention Measures of Pockmark in Tube-making with Cold Rolled Sheet[J]. Steel Rolling, 2010, 27(5): 49-51 |
| |
| Authors: | GUO Tai-xiong DENG Han ZHAO Xiao-zhang |
| |
| Affiliation: | 1.Pangang Group,a.Research Institute Co.,Ltd.,Chengdu 611731,China; b.Panzhihua Steel ＆ Vanadium Co.,Ltd.,Panzhihua 617022,China; 2.Nanjing Iron ＆ Steel Co.,Ltd.,Nanjing 330000,China) |
| |
| Abstract: | The causes and preventive measures of pockmark in the process of making tube with cold rolled sheet were investigated.Results show that deformation degree in making tube with St12 produced by substandard IF steel is just in its critical deformation region,which causes extraordinary coarse grains after annealing and finally forms the pockmark in drawing.Pockmark is effectively prevented by making deformation degree avoid critical deformation region. |
| |
| Keywords: | cold rolled sheet welded tube pockmark critical deformation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《轧钢》浏览原始摘要信息 |
|
点击此处可从《轧钢》下载全文 |
|
