Tailoring Electrochemical Property of Layered Perovskite Cathode by Cu‐doping for Proton‐Conducting IT‐SOFCs

Layered perovskite oxide YBaCuCoO_5+x (YBCC) was synthesized by an EDTA‐citrate complexation process and was investigated as a novel cathode for proton‐conducting intermediate temperature solid oxide fuel cells (IT‐SOFCs). The thermal expansion coefficient (TEC) of YBCC was 15.3 × 10⁻⁶ K⁻¹ and the electrical conductivity presented a semiconductor‐like behavior with the maximum value of 93.03 Scm⁻¹ at 800 °C. Based on the defect chemistry analysis, the electrical conductivity gradually decreases by the introduction of Cu into Co sites of YBaCo₂O_5+x and the conductor mechanism can transform from the metallic‐like behavior to the semiconductor‐like behavior. Thin proton‐conducting (BaZr_0.1Ce_0.7Y_0.1Yb_0.1O_3–δ) BZCYYb electrolyte and NiO–BZCYYb anode functional layer were prepared over porous anode substrates composed of NiO–BZCYYb by a one‐step dry‐pressing/co‐firing process. Laboratory‐sized quad‐layer cells of NiO‐BZCYYb / NiO‐BZCYYb / BZCYYb / YBCC with a 20 μm‐thick BZCYYb electrolyte membrane exhibited the maximum power density as high as 435 mW cm⁻² with an open‐circuit potential (OCV) of 0.99 V and a low interfacial polarization resistance of 0.151 Ωcm² at 700 °C. The experimental results have indicated that the layered perovskite oxide YBCC can be a cathode candidate for utilization as proton‐conducting IT‐SOFCs.