| Abstract: | This work reports the study of four different carbon materials for their application as carbon material in microporous layers for high temperature proton exchange membrane fuel cells electrodes. The microporous layers were prepared with carbon black (a commercial one, Vulcan XC72), two different carbon nanofibers, CNF, (Ribbon and Platelet structure) and carbon nanospheres, all of them prepared in our lab. The microporous layers were characterized by XRD. The hydrophobicity, electrical conductivity, and permeability to different gases were also evaluated. The stability is an important issue to be overcome in the field of proton exchange membrane fuel cells. Thus, accelerated thermal and electrochemical degradation tests in phosphoric acid media were carried out to evaluate the stability of the different advanced materials tested under the same conditions. From all the performed essays, the carbon nanospheres were the best nano‐carbon materials because of the lower degradation degree shown by the microporous layer prepared with them and the good conductivity and permeability achieved, whereas CNF with a Platelet structure showed a low electrochemical stability due to their greater edge plane exposure which favors their corrosion. |
