| 中厚板轧制过程的温度变化规律分析 |
| |
| 引用本文： | 胡贤磊,赵忠,丁敬国,刘相华.中厚板轧制过程的温度变化规律分析[J].钢铁研究学报,2010,22(1):14-14. |
| |
| 作者姓名： | 胡贤磊 赵忠 丁敬国 刘相华 |
| |
| 作者单位： | 东北大学轧制技术及连轧自动化国家重点实验室,辽宁,沈阳,110004 |
| |
| 基金项目： | 国家自然科学基金资助项目(50604006) |
| |
| 摘 要： | 基于中厚板轧制过程的温度变化特点,以热辐射和对流为主要影响因素,对热辐射模型和对流模型进行分析和处理,解析黑度系数、厚度对温度变化规律的影响可知:终轧厚度大于30 mm时,黑度系数的变化对终轧温度的影响很小;终轧温度在10 mm左右时,必须根据后几道次实测温度调整黑度系数;轧件越厚,起始温度越高,温降速度越快。分析得到不同厚度下,平均温度和表面温度差的关系。实际应用表明,终轧温度预测误差基本不超过15℃。
|
| 关 键 词： | 中厚板 轧制 温度 黑度系数 |
| 收稿时间： | 2008-10-22; |
Analysis of Temperature Variation for Plate Rolling Process |
| |
| HU Xian-lei,ZHAO Zhong,DING Jing-guo,LIU Xiang-hua.Analysis of Temperature Variation for Plate Rolling Process[J].Journal of Iron and Steel Research,2010,22(1):14-14. |
| |
| Authors: | HU Xian-lei ZHAO Zhong DING Jing-guo LIU Xiang-hua |
| |
| Affiliation: | State Key Laboratory of Rolling and Automation;Northeastern University;Shenyang 110004;Liaoning;China |
| |
| Abstract: | Based on the temperature variation of plate rolling process,the influence of radiation,convection on plate temperature was analyzed.The results show that when plate finishing thickness is great than 30mm,the blackness coefficient has little influence on finishing temperature.But when finishing thickness is less than 10mm,the blackness coefficient has significant influence on finishing temperature and the blackness coefficient should be modified by measuring the temperature of last passes.The bigger the plat... |
| |
| Keywords: | plate rolling temperature blackness coefficient |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《钢铁研究学报》浏览原始摘要信息 |
|
点击此处可从《钢铁研究学报》下载全文 |
|
