| 3000t复合加载设备的研制及试验方法的研究 |
| |
| 引用本文： | 孙宇,王双锁,刘家泳,杨永昌.3000t复合加载设备的研制及试验方法的研究[J].天津冶金,2011(5):26-30,57. |
| |
| 作者姓名： | 孙宇 王双锁 刘家泳 杨永昌 |
| |
| 作者单位： | 天津钢管集团股份有限公司; |
| |
| 摘 要： | 论述了3000t复合加载试验设备的设计过程,包括设备主体、三点弯高压釜装置的设计及校核。建立了三点弯曲力学模型,对三点弯曲计算原理进行了研究,并通过试验及标定对设备和力学模型进行了验证。结果表明,3000t复合加载设备及配套装置的设计、制造合理,三点弯曲力学模型的建立准确。
|
| 关 键 词： | 复合加载设备 弯曲 高压釜 挠度 力学模型 研究 |
Study and Testing Method of 3000 t Combined Loading Equipment |
| |
| Sun Yu,Wang Shuangsuo,Liu Jiayong,Yang Yongchang.Study and Testing Method of 3000 t Combined Loading Equipment[J].Tianjin Metallurgy,2011(5):26-30,57. |
| |
| Authors: | Sun Yu Wang Shuangsuo Liu Jiayong Yang Yongchang |
| |
| Affiliation: | Sun Yu,Wang Shuangsuo,Liu Jiayong,Yang Yongchang |
| |
| Abstract: | The designing process of 3000 t combined loading testing equipment is demonstrated, including the design and calibration of main equipment and three-point bending autoclave. The authors established the mechanical model of three-point bending, studied its calculation principle and verified the equipment and mechanical model by test and calibration. Results showed the design and manufacturing of 3000 t combined loading equipment and its auxiliaries were reasonable and the mechanical model of three-point bendi... |
| |
| Keywords: | combined loading equipment three-point bending autoclave overall angle change rate deflection mechanical model |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
