新能源汽车ABS粉末冶金感应齿圈的研制 |
| |
引用本文: | 左鹏军,高源,仝晓楠,陈晓晓,王行之,王娟梅. 新能源汽车ABS粉末冶金感应齿圈的研制[J]. 粉末冶金技术, 2020, 38(4): 295-299. DOI: 10.19591/j.cnki.cn11-1974/tf.2019040003 |
| |
作者姓名: | 左鹏军 高源 仝晓楠 陈晓晓 王行之 王娟梅 |
| |
作者单位: | 1.陕西省机械研究院粉末冶金研究所, 咸阳 712000 |
| |
基金项目: | 2018年度陕西省重点研发计划资助项目2018GY-177 |
| |
摘 要: | 采用粉末冶金工艺替代机械加工工艺, 通过分析产品结构, 精选材料配方, 优化控制模具模架设计、温模压制成形、高温烧结、精密整形及达克罗等工艺, 制备出了高质量的ABS感应齿圈成品零件, 并对其进行力学性能测试。结果显示, 材料组份为Fe-0.8Ni-3Co-0.2P的ABS粉末冶金感应齿圈成品密度为7.15g·cm-3, 表面硬度HRB55, 抗拉强度421MPa, 饱和磁感应强度1.12T, 中性盐雾试验240h无锈蚀。结果表明, ABS粉末冶金感应齿圈技术性能指标完全满足新能源汽车制动控制系统应用要求, 用户装机使用运行效果良好。
|
关 键 词: | ABS感应齿圈 粉末冶金 新能源汽车 模具设计 烧结 |
收稿时间: | 2019-04-10 |
Development of ABS powder metallurgy induction gear ring for new energy vehicles |
| |
Affiliation: | 1.Powder Metallurgy Research Institute, Shaanxi Mechanical Research Institute, Xianyang 712000, China2.Shaanxi Huaxia Powder Metallurgy Co., Ltd., Xianyang 712000, China |
| |
Abstract: | Instead of the mechanical processing technology, the high quality ABS induction gear ring parts were manufactured by powder metallurgy technology through studying the product structure, optimizing the material constitute, and controlling the mold design, thermoforming, high temperature sintering, precision shaping, and Dacromet technology. The mechanical properties of the ABS powder metallurgy induction gear ring were tested. In the results, the Fe-0.8Ni-3Co-0.2P ABS powder metallurgy induction gear ring products show the density of 7.15 g·cm-3, the surface hardness of HRB 55, the tensile strength of 421 MPa, the saturation flux density of 1.12 T, and no corrosion for 240 h in the neutral salt spray test. The performance index of ABS powder metallurgy induction gear ring fully meets the application requirements of the new energy vehicles, showing the good operation effect. |
| |
Keywords: | |
|
| 点击此处可从《粉末冶金技术》浏览原始摘要信息 |
|
点击此处可从《粉末冶金技术》下载免费的PDF全文 |
|