| 兴澄特钢高铁低硅烧结的生产实践 |
| |
| 引用本文： | 邓秋明,徐东良. 兴澄特钢高铁低硅烧结的生产实践[J]. 烧结球团, 2005, 30(6): 30-33 |
| |
| 作者姓名： | 邓秋明 徐东良 |
| |
| 作者单位： | 江阴兴澄特种钢铁有限公司 |
| |
| 摘 要： | 经采取优化配矿、配加蛇纹石和生石灰强化制粒、低温厚料层烧结、强化操作等措施，将烧结矿SiO2降低到4．5％左右，并保持了较好的产质量指标。
|
| 关 键 词： | 高铁低硅烧结 优化配矿 产量 质量 |
| 收稿时间： | 2005-11-14 |
| 修稿时间： | 2005-11-14 |
PRODUCTION OF HIGHER-TFe AND LOWER-SiO2 SINTER IN XINGCHENG SPECIAL STEEL CO. |
| |
| Deng Qiuming et al.. PRODUCTION OF HIGHER-TFe AND LOWER-SiO2 SINTER IN XINGCHENG SPECIAL STEEL CO.[J]. Sintering and Pelletizing, 2005, 30(6): 30-33 |
| |
| Authors: | Deng Qiuming et al. |
| |
| Affiliation: | Deng Qiuming et al. |
| |
| Abstract: | In order to produce the higher-TFe and lower-SiO2 sinter, a series of measures, e.g. optimizing the raw material proportion, intensifying granulating, lower-temperature and deep-bed sintering etc., were adopted in XINGCHENG Special Steel Co.. As a result, the SiO2 content in sinter was decreased to 4.5%, and the satisfactory quality indices were also grained. |
| |
| Keywords: | higher-TFe and lower-SiO2 sintering optimization of the raw material proportion output quality |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
