The influence of He/dpa ratio and displacement rate on microstructural evolution: a comparison of theory and experiment

A kinetic model was developed to investigate the influence of the displacement rate and helium generation rate on microstructural evolution in austenitic stainless steels. The model integrates the rate equations describing the evolution of point defects, small point defect clusters, helium-vacancy clusters, and the larger cavity size distribution that is responsible for observable swelling. Cavity (bubble) nucleation is accounted for by the helium-vacancy cluster evolution, while void formation occurs when bubbles grow beyond a critical size in the larger cavity distribution.

A series of ion irradiation experiments were used to both calibrate the model and to provide a comparison between model predictions and experimental observations. The experiments involved single and dual-beam irradiations of solution annealed AISI-316 stainless steel at 873 K. The displacement rates were in the range of 2 × 10⁻³ to 1 × 10⁻² dpa/s and the helium-to-dpa ratios were in the range of 0 to 50 appm He/dpa. The maximum displacement dose was 25 dpa. The experiments revealed a significant effect of helium on both the dislocation structure and the cavity distribution. The model predictions of helium effects over a broad range of He/dpa ratios and displacement rates were consistent with experimental observations.