The corrosion behavior of Ni-Mo alloys in a H2/H2O/H2S gas mixture

The corrosion behavior of Ni-Mo alloys containing up to 40 wt.% Mo was studied over the temperature range of 550–800C in a mixed gas of H₂/H₂O/ H₂S. The scales formed on all alloys contained only sulfides and were doublelayered. The outer scale was single-phase Ni₃S₂. Depending on the alloy composition and reaction conditions, the inner scale was: (1) a mixture of MoS₂ plus Ni₃S₂ with/without Ni, (2) MoS₂, or (3) MoS₂ plus intermetallic particles and/or double sulfide Ni_2.5Mo₆S_6.7. Neither internal oxidation nor internal sulfidation were observed at lower temperatures. Internal sulfidation was however observed at higher temperature when the scale apparently melted. The parabolic law was generally obeyed for the most concentrated alloys. For the two more-dilute alloys the kinetics were mostly linear. A decrease in the corrosion rate occurred with increasing Mo content of the alloy and may be attributed to the presence of increasing volume fractions of MoS₂ and/or of a double Ni-Mo sulfide in the inner region of the scale. For the two most concentrated alloys this may also be due to the presence of a number of particles of the unsulfidized intermetallic compound, which is Ni₃Mo for Ni-30Mo, but NiMo for Ni-40Mo.