| 弧线齿面齿轮的逆向造型 |
| |
| 引用本文： | 汤黎明,曹青梅. 弧线齿面齿轮的逆向造型[J]. 矿山机械, 2010, 0(4) |
| |
| 作者姓名： | 汤黎明 曹青梅 |
| |
| 作者单位： | 河南科技大学机电学院;河南科技大学车辆与动力工程学院; |
| |
| 摘 要： | 弧线齿面齿轮是一种新型齿轮,以弧线齿面齿轮的齿面方程为基础,在轴平面上对结点进行划分,并映射到齿面上,得到沿齿长、齿高方向均匀分布的结点,并以点云方式输入到CATIA软件中。根据啮合过程中齿面不同区域所起作用的不同,采用逆向造型技术及不同的曲面构造方法,完成了弧齿面齿轮的三维CAD模型,为进一步双弧线齿面齿轮的性能分析及数控仿真加工奠定了基础。
|
| 关 键 词： | 弧线齿面齿轮 三维造型 逆向造型 曲面构造 |
Reverse modeling of the gear with arc tooth surfaces |
| |
| TANG Liming CAO Qingmei School of Mechatronics Engineering,Henan University of Science , Technology,Luoyang ,Henan,China Vehicle , Motive Power Engineering College. Reverse modeling of the gear with arc tooth surfaces[J]. Mining & Processing Equipment, 2010, 0(4) |
| |
| Authors: | TANG Liming CAO Qingmei School of Mechatronics Engineering Henan University of Science Technology Luoyang Henan China Vehicle & Motive Power Engineering College |
| |
| Affiliation: | TANG Liming1 CAO Qingmei2 1School of Mechatronics Engineering,Henan University of Science , Technology,Luoyang 471003,Henan,China 2Vehicle & Motive Power Engineering College |
| |
| Abstract: | The gear with arc tooth surfaces is a new one.Based on its tooth equation,nodes are designed on the axial plane and mapped on the tooth surface to make their distribution equal along the length direction and the height direction.Then these nodes are inputted into CATIA with the pattern of point cloud.According to different functions of areas during meshing,the 3D model of the gear with arc tooth surfaces is built by reserve technology and different surface modeling ways.So this provides basis for the perfor... |
| |
| Keywords: | gear with arc tooth surfaces 3D modeling reverse modeling surface construction |
| 本文献已被 CNKI 等数据库收录！ |
|
