首页 | 本学科首页   官方微博 | 高级检索  
     

碳纤维增强铜基复合材料的性能研究
引用本文:龙卧云,丁晓坤,杨晓华,林智群,任文辉,李雪松.碳纤维增强铜基复合材料的性能研究[J].理化检验(物理分册),2006,42(8):379-381.
作者姓名:龙卧云  丁晓坤  杨晓华  林智群  任文辉  李雪松
作者单位:1. 湖南农业大学理学院应用物理系,长沙,410128
2. 福州大学测试中心,福州,350002
基金项目:湖南农业大学“人才科学基金(稳定、引进)”(60169:690506).
摘    要:采用粉末冶金法制备了短碳纤维增强铜基复合材料。经对不同碳纤维含量试样的硬度及导电性能的测定,并在干摩擦的条件下研究了碳纤维增强铜基复合材料的摩擦磨损性能,同时对磨损表面的微观结构进行观察来分析其磨损机理。实验结果表明,随着碳纤维含量的增加,该材料的硬度和耐磨性均有所增加,但其导电性有所下降。

关 键 词:碳纤维  复合材料  粉末冶金  耐磨性
文章编号:1001-4012(2006)08-0379-03
收稿时间:2006-03-06
修稿时间:2006-03-06

STUDY OF PROPERTIES OF CARBON FIBER REINFORCED COPPER MATRIX COMPOSITES
LONG Wo-yun,DING Xiao-kun,YANG Xiao-hua,LIN Zhi-qun,REN Wen-hui,LI Xue-song.STUDY OF PROPERTIES OF CARBON FIBER REINFORCED COPPER MATRIX COMPOSITES[J].Physical Testing and Chemical Analysis Part A:Physical Testing,2006,42(8):379-381.
Authors:LONG Wo-yun  DING Xiao-kun  YANG Xiao-hua  LIN Zhi-qun  REN Wen-hui  LI Xue-song
Affiliation:1. Department of Applied Physics, Science College, Hunan Agricultural University, Changsha 410128, China; 2. Testing Center of Fuzhou University, Fuzhou 350002, China
Abstract:The short carbon fiber reinforced copper matrix composites were prepared by power metallurgy. The effect of the volume content of carbon fiber on hardness and electrical conductivity of the CF-Cu composite was studied. The friction and wear properties of CF-Cu composite under dry friction condition were studied and the involved wear mechanism was analyzed by observing the wear surface of composites. For the CF-Cu composites with different carbon fiber content, with the increasing of carbon fiber content, hardness and wear resistant ability of the CF-Cu composite increase, but the electrical conductivity decreases.
Keywords:Carbon fiber  Composition materials  Power metallurgy  Wear property
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号