| 注射环氧树脂的成型工艺性能研究 |
| |
| 引用本文： | 陈湘 唐薰. 注射环氧树脂的成型工艺性能研究[J]. 热固性树脂, 1999, 14(2): 10-12 |
| |
| 作者姓名： | 陈湘 唐薰 |
| |
| 作者单位： | 湖南岳阳石化总厂环氧树脂研究所!414014(陈湘，何愈)，湖南大学(唐薰) |
| |
| 摘 要： | 本文用环己烷衍生物作改性剂合成了一种改性的ＢＰＡ型环氧树脂，讨论了该改性组分对树脂应用性能的影响，由于环己烷衍生物结构的引入，使得树脂粘度和固化物线膨胀系数降低，树脂胶化时间缩短。
|
| 关 键 词： | 注射环氧树脂 成型工艺性能 环己烷衍生物 |
STUDY ON THE PROCESSING PROPERTIES OF INJECTING EPOXY RESIN |
| |
| Chen Xiang, He Yu. STUDY ON THE PROCESSING PROPERTIES OF INJECTING EPOXY RESIN[J]. Thermosetting Resin, 1999, 14(2): 10-12 |
| |
| Authors: | Chen Xiang He Yu |
| |
| Abstract: | In this thesis, a BPA-type epoxy resin modified by cyclohexyl derivations was synthesized, and the influence of the modifying composition on the application properties of the epoxy resin was studied. The results showed that, compared with the common epoxy resin, the modified resins have market advantages dus to its processing properties, such as lower resin viscosity, smaller expansion coefficient of setting compounds and shorter gelling-time. |
| |
| Keywords: | Injecting epoxy resin Processing property Cyclohexyl derivations |
| 本文献已被 CNKI 维普 等数据库收录！ |
