| JWA1680卷绕头恒定接触压力的调节 |
| |
| 引用本文： | 全潇,苏振,孟超群,杨崇倡.JWA1680卷绕头恒定接触压力的调节[J].合成纤维,2011,40(10):30-34. |
| |
| 作者姓名： | 全潇 苏振 孟超群 杨崇倡 |
| |
| 作者单位： | 1. 苏州荣文合成纤维有限公司,江苏苏州215427;纺织装备教育工程研究中心,上海201620
2. 纺织装备教育工程研究中心,上海201620;东华大学机械工程学院,上海201620 |
| |
| 摘 要： | 基于对JWA1680卷绕头结构的分析,计算得到卷绕过程中接触压力角的变化过程,通过安装比例阀实现对主气缸压强的分段控制。经过修正得到一组合理的分段直径及相应气缸压强值,卷绕接触压力基本保持恒定,丝饼成型良好。
|
| 关 键 词： | JWA1680卷绕头 接触压力角 比例阀 气缸压强 |
The Adjustment of JWA1680 Winder Constant Contact Pressure |
| |
| QUAN Xiao,SU Zhen,MENG Chao-qun,YANG Chong-chang.The Adjustment of JWA1680 Winder Constant Contact Pressure[J].Synthetic Fiber in China,2011,40(10):30-34. |
| |
| Authors: | QUAN Xiao SU Zhen MENG Chao-qun YANG Chong-chang |
| |
| Affiliation: | QUAN Xiao1,2,SU Zhen2,3,MENG Chao-qun2,YANG Chong-chang2,3(1.Suzhou Rongwen Synthetic Fiber Co.Ltd.,Suzhou 215427,Jiangsu,China,2.Ministry of Education Engineering Research Center of Textile Equipment,Shanghai 201620,3.Donghua University,College of Mechanical Engineering,China) |
| |
| Abstract: | Based on the analysis of JWA1680 winder structure,the change process of contact pressure angle in winding is obtained,the segmental control of main cylinder pressure is achieved by mounting proportional valve.And through adjustment,a reasonable set of diameter and cylinder pressure is gained by calculating,contact pressure in winding nearly keep constant and package building is good. |
| |
| Keywords: | JWA1680 winder contact pressure angle proportional valve cylinder pressure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《合成纤维》浏览原始摘要信息 |
|
点击此处可从《合成纤维》下载全文 |
|
