| 聚丙烯/凹凸棒土复合材料的结晶行为 |
| |
| 引用本文： | 马少君,于贵春,王玉芬,王立岩,丁贵龙.聚丙烯/凹凸棒土复合材料的结晶行为[J].合成纤维,2011,40(9):19-22. |
| |
| 作者姓名： | 马少君 于贵春 王玉芬 王立岩 丁贵龙 |
| |
| 作者单位： | 1. 沈阳工业大学石油化工学院,辽宁辽阳,111003
2. 辽阳石化分公司,辽宁辽阳,111003 |
| |
| 摘 要： | 通过双螺杆挤出机熔融共混制备了聚丙烯(PP)/凹凸棒土(ATP)复合材料样品,分别采用偏光显微镜和差示扫描量热仪对其结晶行为进行了研究。研究表明,复合材料样品的偏光显微镜照片呈现球晶所特有的十字消光现象,球晶尺寸与纯PP球晶的尺寸相比有所减小。非等温结晶测试结果表明,复合材料样品的结晶温度随着ATP含量的增加向高温方向移动,而且半结晶期缩短,PP/ATP复合材料的总体结晶速率增加;ATP的加入改变了PP成核的机制,起到了异相成核的作用。随着降温速率的增大,PP及PP/ATP(95/5)复合材料的结晶起始温度和结晶峰值温度均向低温方向移动,半结晶期变短。
|
| 关 键 词： | 聚丙烯 凹凸棒土 复合材料 结晶 |
Crystallization Behavior of Polypropylene/Attapulgite Composites |
| |
| MA Shao-jun,YU Gui-chun,WANG Yu-fen,WANG Li-yan,DING Gui-long.Crystallization Behavior of Polypropylene/Attapulgite Composites[J].Synthetic Fiber in China,2011,40(9):19-22. |
| |
| Authors: | MA Shao-jun YU Gui-chun WANG Yu-fen WANG Li-yan DING Gui-long |
| |
| Affiliation: | MA Shao-jun1,YU Gui-chun2,WANG Yu-fen2,WANG Li-yan1,2,DING Gui-long1(1.School of Petrochemical Engineering of Shenyang University of Technology,Liaoyang 111003,Liaoning,China,2.Liaoyang Petrochemical Company of China,China) |
| |
| Abstract: | Polypropylene(PP)/attapulgite(ATP)composites were prepared in the melt blending method through twin screw extruder,and their crystallization behaviors were respectively studied by polarized light microscope and differential scanning calorimetry.The results showed that the polarized light photo of the composite assumed cross extinct appearance characteristic of spherulites,and the dimensions of the spherulites of PP/ATP composites were smaller than those of PP.The results of non-isothermal crystalline behavi... |
| |
| Keywords: | polypropylene attapulgite composite crystallization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《合成纤维》浏览原始摘要信息 |
|
点击此处可从《合成纤维》下载全文 |
|
