Input system for part model in CAD from coloured hand-written illustration with use of ITV

An input system for CAD is developed to construct a part model within a computer from a hand-written sketch. The sketch is drawn based on the technical illustration method. The shape of the input part is constructed by the combination of cuboids and cylinders at present. A coloured illustration is adopted for the ease of the shape recognition and for the input of the technological information.

The illustration is fed into the computer via a black and white ITV. Colours are identified referring to the brightness of the input image. The constitutive bodies, the geometric element with the technological information and the content of the technological information are recognized through image processing such as noise filtering, thinning of the contours, detection of lines and so on. The input system outputs a set of commands to the modelling system. The integrated part model which includes not only the geometrical information but also the technological information of the part is constructed by the connected modelling system CIMS/MODE.

The combination of the input system and the modelling system can support the designer to construct the detailed part model within the computer effectively. It is expected to extend the ability of the input system to identify general hand-written illustrations so that the input method will be more practical and useful.