|
|||||
|
|
Abrasive Wear Behavior of High Chromium Cast Iron and Hadfield Steel-- A Comparison |
|
| Authors: | Mehdi Mazar Atabaki Sajjad Jafari Hassan Abdollah-pour |
| Affiliation: | 1. Department of Materials Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, JohorBahru 81310, Malaysia／Institute for Materials Research, School of Process, Environmental and MaterialsEngineering, Faculty of Engineering, University of Leeds, Leeds LS29JT, UK 2. Department of Materials Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, JohorBahru 81310, Malaysia／Department of MaterialsEngineering, Faculty of Engineering, Semnan University, Semnan 85138-33931, Iran 3. Department of MaterialsEngineering, Faculty of Engineering, Semnan University, Semnan 85138-33931, Iran |
| Abstract: | Abstract Wear properties of two different crushers used for grinding raw materials of cement industry are compared using pin-on-disk wear test. The wear test was carried out with different loads on a pin. Abrasive wear behavior of two alloys was evaluated by comparing mass loss, wear resistance, microhardness and friction coefficient. The microstructure of the specimens was detected using optical microscope. The results showed that abrasive wear of high chromium cast iron is lower than that of Hadfield steel. Due to the presence of M7C3 carbides on the high chromium cast iron matrix, impact crushers exhibited higher friction coefficient. |
| Keywords: | abrasive wear Hadfield steel high chromium cast iron |
| 本文献已被 维普 万方数据 等数据库收录！ | |
| 点击此处可从《钢铁研究学报(英文版)》浏览原始摘要信息 | |
| 点击此处可从《钢铁研究学报(英文版)》下载全文 | |