Erratum to “Validation of the use of heat transfer models in liquid/solid fluidized beds for ice slurry generation” [International Journal of Heat and Mass Transfer 46 (2003) 3683-3695] |
| |
Authors: | P. Pronk J.W. Meewisse C.A. Infante Ferreira |
| |
Affiliation: | Engineering Thermodynamics Section, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands |
| |
Abstract: | In the concerned paper, tube dimensions have been taken from the experimental set-up drawings. Recently, during Wilson plot calibration tests, after extension of the operating range of the set-up, came to light that the tube sizes used were slightly different from what was stated in the drawings. Consequently, published experimental fluidized bed heat transfer coefficients are up to 40% too low and some conclusions had to be adapted. The new, correct experimental heat transfer results show a much better agreement with heat transfer models in literature. The authors of the subjected paper deeply regret the errors. Corrected versions of Sections 4 and 5 of the paper are presented here. |
| |
Keywords: | Fluidized beds Heat transfer Phase change |
本文献已被 ScienceDirect 等数据库收录! |
|