| 基于VB 6.0的双容水箱液位串级控制系统设计 |
| |
| 引用本文： | 李芹,肖思名.基于VB 6.0的双容水箱液位串级控制系统设计[J].上海电力学院学报,2009,25(4):325-328,345. |
| |
| 作者姓名： | 李芹 肖思名 |
| |
| 作者单位： | 1. 上海电力学院,电力与自动化工程学院,上海,200090
2. 日本工业大学,电气工程系,埼玉,3458501 |
| |
| 基金项目： | 上海市科委攻关项目，上海电力学院2009年度教改项目 |
| |
| 摘 要： | 介绍了基于VB6．0软件的双容水箱液位串级控制系统的设计和实现方法．通过在SUPCON CS4000 DDC实验装置上进行实验得到双容水箱的数学模型，应用Simulink进行串级控制系统仿真．把改进的PID控制器仿真算法应用于双容水箱液位串级控制系统主副回路的调节，用VB6.0软件编写了该控制系统的仿真软件并进行仿真，其结果与Simulink的仿真结果相比，验证了串级控制系统仿真软件的正确性．
|
| 关 键 词： | VB 6.0软件 PID控制器 串级控制 |
| 收稿时间： | 6/1/2009 12:00:00 AM |
Design of Double-capacity Water Tank Liquid Level Cascade Control System Based on VB 6.0 |
| |
| LI Qin and XIAO Si-ming.Design of Double-capacity Water Tank Liquid Level Cascade Control System Based on VB 6.0[J].Journal of Shanghai University of Electric Power,2009,25(4):325-328,345. |
| |
| Authors: | LI Qin and XIAO Si-ming |
| |
| Affiliation: | 1.School of Electric Power and Automation Engineering;Shanghai University of Electric Power;Shanghai 200090;China;2.Dept.of Electrical and Electronics Engineering;Nippon Institute of Technology;Saitama Pref.345-8501;Japan |
| |
| Abstract: | A method of designing and realizing the liquid level cascade control system of double-capacity water tank is introduced.The double-capacity water tank dynamic model is derived through experiment on the SUPCON CS4000 device,and the cascade control system simulation is finished by Simulink.An improved PID controller simulation method is used to regulate the main loop and inner loop of the cascade control system,and VB 6.0 software is used to program the simulation software.A comparison with Simulink result pr... |
| |
| Keywords: | VB |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《上海电力学院学报》浏览原始摘要信息 |
|
点击此处可从《上海电力学院学报》下载全文 |
