| 开发中厚板无切边轧制工艺提高成材率的研究 |
| |
| 引用本文： | 阳辉.开发中厚板无切边轧制工艺提高成材率的研究[J].重庆科技学院学报(社会科学版),1996(4). |
| |
| 作者姓名： | 阳辉 |
| |
| 作者单位： | 重庆钢铁高等专科学校压力加工教研室 重庆 |
| |
| 摘 要： | 摸拟了中厚板轧制变形规律,试验通过平辊立轧和带孔型刻槽立辊倒棱轧制,对铅坯轧制过程中侧面形状及平面形状变化进行了系统的分析,得出在倒棱轧制条件下成品铅板切边损失减少1.30％,切头损失减少0.25％,可以相应提高成材率1.55％,倒糟轧制与咬边返回轧制相结合为我国开发新型无切边轧制工艺的工业性生产提供了可能。
|
| 关 键 词： | 倒棱轧制 双鼓量 成材率 |
TO FIND A NEW TRIMMING FREE PLACE ROLLING METHOD TO INCREASE YIELD |
| |
| Yang Hui.TO FIND A NEW TRIMMING FREE PLACE ROLLING METHOD TO INCREASE YIELD[J].JOURNAL OF CHONGQING UNIVERSITY OF SCEENCE AND TECHNOLOGY,1996(4). |
| |
| Authors: | Yang Hui |
| |
| Affiliation: | Presswork Teaching and Research Section |
| |
| Abstract: | The deformation of plate rolling is simulated by means of rolling and chamfer rolling.Through systematic analysis of side and plan view change on lead slab in chamfer rolling, side crop of lead plate decreases 1.30 percent, end crop decreases 0.25 percent, and yield increases 1.55 percent.It is possible to find a new trimming free plate rolling method in combination chamfer rolling with side-bile and return. |
| |
| Keywords: | chamfer rolling overlap yield |
| 本文献已被 CNKI 等数据库收录！ |
